TDOT Lane Control Signals

Status: Planned

Description

Overhead lane control signals along facilities maintained by TDOT.

Stakeholders

StakeholderRoleRole Status
TDOTOwnsPlanned

Physical Objects

ITS Roadway Equipment

Functional Objects

Functional ObjectDescriptionUser Defined
Roadway Basic Surveillance'Roadway Basic Surveillance' monitors traffic conditions using fixed equipment such as loop detectors and CCTV cameras.False
Roadway Dynamic Lane Management and Shoulder Use'Roadway Dynamic Lane Management and Shoulder Use' includes the field equipment, physical overhead lane signs and associated control electronics that are used to manage and control specific lanes and/or the shoulders. This equipment can be centrally controlled by a Traffic Management Center or it can be autonomous and monitor traffic conditions and demand along the roadway and determine how to change the lane controls to respond to current conditions. Lane controls can be used to change the lane configuration of the roadway, reconfigure intersections and/or interchanges, allow use of shoulders as temporary travel lanes, designate lanes for use by special vehicles only, such as buses, high occupancy vehicles (HOVs), vehicles attending a special event, etc. and/or prohibit or restrict types of vehicles from using particular lanes. Guidance and information for drivers can be posted on dynamic message signs.False
Roadway Traffic Information Dissemination'Roadway Traffic Information Dissemination' includes field elements that provide information to drivers, including dynamic message signs and highway advisory radios.False

Physical Standards

Document NumberTitleDescription
ITE ATC 5201Advanced Transportation ControllerThis standard defines the functionality and performance requirements for a modern ITS controller known as an ATC. It is similar to the NEMA TS–2 standard in that it defines basic capabilities but leaves hardware choices up to the manufacturer.
ITE ATC 5202Model 2070 Controller StandardThis standard specifies the hardware for a modern, open–architecture controller for ITS applications that can run Linux and is capable of executing advanced signal controller logic, among other things.
ITE ATC 5301Intelligent Transportation System Standard Specification for Roadside CabinetsThis standard specifies the characteristics of a modern controller cabinet for the ITS industry.
ITE ATC 5401Application Programming Interface Standard for the Advanced Transportation ControllerThis standard defines the application programmers' interface (API) that should be supported by an ATC, which is an open–architecture controller that can host multiple ITS applications.
NEMA TS 8Cyber and Physical Security for Intelligent Transportation SystemsThis specification describes how agencies and other transportation infrastructure owner/operators should implement cyber– and physical–security for ITS.
NEMA TS2Traffic Controller Assemblies with NTCIP RequirementsThis specification covers traffic signaling equipment used to facilitate and expedite the safe movement of pedestrians and vehicular traffic.
NEMA TS4Hardware Standards for Dynamic Message Signs (DMS) With NTCIP RequirementsThis standard provides hardware specifications for safe, dependable, functional, and easily maintained Dynamic Message Sign (DMS) equipment.

Interfaces To

(View Context Diagram)

TDOT Connected Vehicle Roadside Equipment
TDOT DMS
TDOT Region 2 TMC – Chattanooga
Vehicle Operator